FCX metal structure Common board in the sheet metal industry

Metal plate processing is called Sheet Metal processing. For details, for example, the application of board manufacturing chimneys, iron barrels, fuel tank fuel pots, ventilation pipes, elbow size heads, sky and round places, funnel shapes, etc. Tortoise molding, welding, riveting, etc., must have geometric knowledge. So what are the three metal plates commonly used in sheet metal processing?

The three metal plates commonly used in Industrial Sheet Metal Part processing are as follows:

Galvanized steel plate: There are two types of galvanized steel plates, one is electroplating steel plate (SECC). The steel plate is made of sedimentation, pickling, electroplating, and various post -treatment. Extract resistance and decorative appearance. Electro -galvanized steel plates are generally used in computer sheet metal case processing.

Ordinary Cold Rolling Plate (SPCC): Ordinary cold -rolled plates are Sheet Metal Part or slices that are required to be continuously rolled through the cold rolling machine. The surface is not protected, and it is easily oxidized and rusty by air. , Plating and other protection treatment.

Stainless steel: Stainless steel plates have very good mechanical properties. Stainless steel with different ingredients can achieve different performance, so it is widely used in the sheet metal processing industry.

Hot immersion galvanized steel plate (SGCC): Hot immersion galvanized steel roll refers to the semi -finished product after the hot rolling or cold rolling, after cleaning, annealing, immersed in the dissolved zinc groove with a temperature of about 460 ° C. Drying zinc layer, then combined with quality and chemical treatment. SGCC materials are hard and ductantly (avoid deep pumping design), thicker zinc layer, and weldability than SECC materials.
contact fcx